Description
GRS Bifrost Spigot
The Spigot can be installed on our GRS Bifrost in minutes or used with our Spigot adaptor to fit Picatinny rails.
There are two M5x20 screws, depending on whether you are using the Picatinny Rail on your Bifrost bottom slot or not. Use the 45-degree sink head screw when using the Piccarail on your Bifrost.
The Spigot fits our GRS Bipod and most VersaPod bipods.
Please note, open up the hole for the screw with a 6mm drill bit so the threads on the screw are clear, so it can enter freely into the threads of the spigot. If you do not do this, there is a chance of ruining the threads on the spigot if it enters misaligned.
Recommended for the following products:



Reviews
There are no reviews yet.